Report
![[Laser cut and engrave] Necklace holder packaging](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1785a82e-2849-4d8b-9b6a-e27b4b3203cd?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Necklace holder packaging
InstructionNecklace packaging (1)
.xcs
Application scenario
Laser processing (1min)
Machine & module
xTool F1 Ultra
20WCompatibles · 10
Material used
Kraft Paper-9oz(300g)
37
467
Information
these inserts help hold your necklace for shipping or for in person sales.
Instruction
1
Step1: Place your craft paper
Preview
Place and align your kraft paper with your machine smaller machines may not be able to use the full sheet of kraft paper.
2
Step2: Connect your machine
Preview
Make sure you are connected to your machine before proceeding!
3
Step3: Always Frame!
Preview
Always make sure your material is framed, measure twice cut once!
4
Step4: Prep!
Preview
Once you're ready press your xtool button and away we go! with the proper settings cutting this should take less than 1 minute!
5
Step5: You're done!
Preview
If your machine didn't cut it out in one pass no worries just reprocess it! I hope these inserts help you in all your future works!
Comments
