HomeTemplatesDecorHome DecorDoor Sign
stephcreated
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Haunted House Hanger

Instruction
Haunted Welcome Hanger.xcs
Haunted Welcome Hanger
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool M1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
36
505
Information
      Spooky season is upon us! Share you love for the season with this door hanger!
Instruction
1
Step1: The Back board
Preview
  • Create a 11.5" diameter
  • Create two holes at the top for hanging
    • I normally use .35"x .35"
  • Select all objects and set to “cut”
  • With them all selected select group
2
Step2: The Middle Frame
Preview
Preview
  • Create a diameter 11.5"
  • Create another diameter 10.5"
  • Select both objects and align center
  • With them both selected on the right side panel click “make compound vector”
  • Next, go into the shapes panel on the left and go under festival
    • Select the one of the haunted houses
    • Create a small circle and overlap it with the bottom of the haunted house as shown in the second photo
    • Select only the house and the circle and click unite 
  • Align the house at the bottom of the circle like shown in the 3rd photo
    • Select the house and circle frame and click unite at overlap
    • And select them both again and select unite
3
Step3: The Front Frame
Preview
  • Create a diameter 11.5"
  • Create another diameter 10.5"
  • Select both objects and align center
  • With them both selected on the right side panel click “make compound vector”
  • Create text
    • use cursive font
    • arch the text using the arch symbol to the right of the text
    • weld the text together
  • Right click, make a copy of the text and paste off to the side
  • Go back to the first text and place of the bottom of the frame in the center you can select both objects and vertically align
    • Once you have it where you like select both objects and "unite'"
4
Step4: Other Images and Laser
Preview
  • Under festival you can add some more graphics to your project.
    • Bats, witch, ghosts, etc.
  • Make sure all objects are set to cut
  • Auto measure you material.
5
Step5: Paint & Assemble
Preview
Preview
Preview
Preview
  • Paint your project as you choose.
    • Glue the middle frame on top of the back board
    • Glue your front frame on top of the middle board
    • Making sure all sides are flush when gluing these parts
  • Glue your welcome on top of the front frame outline of welcome
  • Add the other graphics you may have cut out.
Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC0