Report
Orange Acrylic Seahorse Earrings Handmade Jewelry Making
Instructionsea horse
.xcs
Application scenario
Laser (6min)
Machine & module
xTool F1
Material used
3mm Black Acrylic
158
1003
Information
With this acrylic project you will learn how to make beautiful acrylic earrings with your xTool laser. You'll learn how to engrave and cut orange acrylic.
Instruction
1
Step1: What you will need
For this project you will need orange acrylic 3mm wide or any other acrylic colour you will like to choose as well as earrings hooks for jewellery making.
2
Step2: Instructions
Preview
Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.
Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 3 or four passes.
3
Step3: Enjoy
Now that the pieces are cut you can assemble them and voila! you have a very beautiful set of acrylic earrings.
Comments
Remixes
xTool Supplies Used in This Template