Report
![[Laser cut and engrave] Motel keychain blank](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/bb7b0270-8e2f-4b61-9482-4a05de6850bd?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Motel keychain blank
Instructionmotel
.xcs
Application scenario
Laser
Machine & module
xTool S1
40WCompatibles · 8
Material used
3mm Black Opaque Glossy Acrylic（3pcs）
56
598
Information
This is a motel keychain blank.
Instruction
1
Step1: Design
Preview
For this design, I used the Edit Node tool to create the motel keychain shape. It’s a bit complex, so I couldn’t take photos of every step. Once the shape is ready, you'll need to place your design onto the keychain.
2
Step2: Material
Preview
For this, I used black acrylic, but a multi-color acrylic might work even better. Just make sure to adjust the settings based on your chosen color to achieve the best results.
3
Step3: Laser Time
Preview
It's laser time! Make sure to adjust your settings based on your wattage. This guide is for a 40-watt S1 laser, but a P2 will work best. And don’t forget to wear your laser safety glasses!
4
Step4: You're Done
Preview
Good news! You're done with your blank keychain. Now you can add your own design to it. Great job!
Comments
