Report
![[Laser cut and engrave] Custom Bookmark](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/932b13d3-9a2d-4c6f-ac15-ecf990186293?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Custom Bookmark
InstructionBookmark
.xcs
Application scenario
Laser (3min)
Machine & module
xTool F1 Ultra
Compatibles · 8
Material used
Black Metal Business Card
20
501
Information
This is a custom bookmark for school.
Instruction
1
Step1: Design
Preview
Preview
Preview
For this project, you'll need to change the name to fit your own. I chose "Drew" for my project, but you can easily change it. After that, align the name on your business card, and you'll be done with the design phase.
2
Step2: Material
Preview
For this, I used an XTool business card and chose a red one. You can use any color you like; just make sure you know the best settings for your business card.
3
Step3: Laser Time
Preview
Now it's time to use the laser. Make sure to wear your laser safety glasses and do a test run on the cutting, as the settings may vary depending on the color. I found that my initial settings were a bit weak, but the final result still turned out well.
4
Step4: You're Done
Preview
Good news! You're done with your custom bookmark. Great job!
Comments
