Report
![[Laser cut and engrave] Halloween Gnome with Bats](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/95f55abb-af2a-482e-830a-b5a91188675b?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Halloween Gnome with Bats
InstructionGnome with Bat
.xcs
Application scenario
Laser (30min)
Machine & module
xTool S1
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
211
1488
Information
Add a touch of Halloween magic to your space with this charming Halloween Gnome decoration! This four-layer design features a whimsical gnome holding a bat. Whether used as a halloween decorative topper or a festive centerpiece, this gnome is sure to bring Halloween cheer to any setting!
Key Features:
4-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Scalable to your desired size.
Perfect for both beginners and experienced makers.
Download this design and start creating your own enchanted Halloween Gnome!
Instruction
1
Step1: Using xTool Creative Space
Preview
Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.
BLACK LAYER
- Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
- Select the black layer (this layer contains the path for cutting).
- Set the processing type of the black layer to Cut.
- Click on “EasySet panel” to open the power and speed settings for the selected layer.
- Set the Power (S1-20w: 100)
- Set Speed (S1-20w: 5)
- Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview
After cutting you have 5 elements.
You should glue all the elements of this decorative together.
You can paint before gluing.
3
Step3: Done
Preview
Elevate your Halloween celebrations with this decorative gnome!
Comments
