Report
![[Laser cut and engrave] OG Hawk Tuah keychain](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a1023a0d-4c5b-419f-8a97-3769b0485f15?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
OG Hawk Tuah keychain
Instructionmissy elliot hawk tuah
.xcs
Application scenario
Laser (10min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
20
751
Information
Turn leftover wood scraps into my take on the viral trend of the summer
Instruction
1
Step1: Grab a wood piece or scrap
This design is simple and makes use of a smaller piece of wood. I used a scrap piece from making my stacking bins. The piece or tag needs to be about 4inches x 2.5 inches or 10.5cm x 6cm.
2
Step2: Process
set your machine and let it work its magic
3
Step3: Enjoy!
After a few short moments, behold your new tag or keychain. Pin it to a bulletin board with a tack, put it on a string/keychain, etc. Have your own piece of the viral summer fun…with a Gen X twist.
Comments
