HomeTemplatesHome DecorOrnament
stephcreated
Report
[Laser cut and engrave] Paw Print Ornament
Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] Paw Print Ornament
[Laser cut and engrave] Paw Print Ornament
[Laser cut and engrave] Paw Print Ornament
[Laser cut and engrave] Paw Print Ornament

Paw Print Ornament

Instruction
PetPawOrnament.xcs
PetPawOrnament
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool M1
10W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
85
437

Information

      Make your fur baby feel part of the family with their very own ornament for the tree.

Instruction

1

Step1: The Design

Paw Print Ornament instruction: step 1 - The Design
Preview
  • Create a 4" diameter
  • Had a paw print I had from another project I brought in
  • Created a hole at the top for the ribbon
  • You can play with the place ment of the paw print and the text of your fur baby
  • I put the paw print up more for the text to slant at the bottom more
    • the choice is yours
2

Step2: Laser

Paw Print Ornament instruction: step 2 - Laser
Preview
  • Check to make sure all your objects are set to “cut”
  • After placing your material in your machine make sure you auto measure
3

Step3: Paint & Assembly

Paw Print Ornament instruction: step 3 - Paint & Assembly
Preview
  • Paint your text and glue on your ornament.
4

Step4: Options

Paw Print Ornament instruction: step 4 - Options
Preview

You can get really creative with this pieces. 

  • You can cut a 4" diameter STAIN it and glue the one with the cut out paw on top.
  • OR 
  • You can cut a 4" diameter it and glue the one with the cut out paw on top and glue your paw prints on top to give the paw a 3D look.

Options are really up to you to make this design yours.

Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC0