HomeTemplatesDecorSeasonal & Themes DecorThemed Decor
cfugle
Report
[Laser cut and engrave] Tree Ornament "wish upon a star"
Project made with xTool M1 machine for Winter.
Project made with xTool M1 machine for Winter.
[Laser cut and engrave] Tree Ornament "wish upon a star"
Project made with xTool M1 machine for Winter.
[Laser cut and engrave] Tree Ornament "wish upon a star"
Project made with xTool M1 machine for Winter.
[Laser cut and engrave] Tree Ornament "wish upon a star"
Project made with xTool M1 machine for Winter.
[Laser cut and engrave] Tree Ornament "wish upon a star"
[Laser cut and engrave] Tree Ornament "wish upon a star"
[Laser cut and engrave] Tree Ornament "wish upon a star"
[Laser cut and engrave] Tree Ornament "wish upon a star"
[Laser cut and engrave] Tree Ornament "wish upon a star"
[Laser cut and engrave] Tree Ornament "wish upon a star"
[Laser cut and engrave] Tree Ornament "wish upon a star"

Tree Ornament "wish upon a star"

WISHUPONASTAR.xcs
WISHUPONASTAR
.xcs
Application scenario
Laser (15min)
Machine & module
xTool M1
10W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
7
314

Information

      about 8" across this mega ornament would also be superb iun a sunny window. Single layer 3mm basswood, heat foiled using heat reactive foils and ZIG glue pens. Glue areas on the surface, allow to tack and rub reactive foils on top using a bone folder for pressure.
Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-SA