HomeTemplatesFashion & WearablesJewelry
gadgetsbeyondthisworld
Report
Laser cut and engrave
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Green Acrylic Turtle Pendant Earrings Jewelry Jewellery Making

Instruction
turtle keyring.xcs
turtle keyring
.xcs
Application scenario
Laser (6min)
Machine & module
xTool F1
Material used
3mm Black Acrylic
109
1065
Information
      With this acrylic project you will learn how to make an acrylic pendant which can double as earrings even a keyring with your xTool laser.
Instruction
1
Step1: What you will need

For this project you will need green acrylic 3mm wide or any other acrylic colour you will like to choose as well as a chain or earrings hooks if you decide to convert it to earrings for jewellery making.

2
Step2: Instructions

Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.

 

Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 3 or four passes.

3
Step3: Enjoy

Now that this piece is cut you can assemble it and voila! you have a very nice pendant which can double as beautiful earrings.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1

License

CC BY