Report
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f847c4c4-97aa-4eef-8975-14e6817eddd2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
School Checklist
Instructionhanger and foot back
.xcs
Show 3 more
Application scenario
Laser (45min)
Machine & module
xTool S1
40WMaterial used
3mm plywood
3mm Plywood
3mmm plywood 12" x 12"
103
1599
Information
This is a wooden checklist to make sure you children have what they need before going out the door. It is made out of 3mm plywood, card board. There are 3 layers of plywood and a layer of cardboard to add space for the answers to slide.
Instruction
1
Step1: Cutting out the front can be done on a pre painted piece of 3mm plywood. Settings will need to be tested for MDF
Preview
The Check list front also has the slides on that panel.
2
Step2: middle and back
The middle piece and back pieces are cut from a 12" x 19" piece of 3mm unfinished Plywood. Once cut out they can be glued together.
3
Step3: Cardboard filler layer
The cardboard layer is a filler so the answer slide move freely. The setting I used were for a cereal box.
4
Step4: final assembly
Preview
With the back and center piece glued together, wax the slide pieces and put the slides place. Then glue the cardboard filler and front on. I also included a file for a hanger and feet to glue on the back.
Comments
