HomeTemplatesDecorHome DecorWall Art
Jo Stapleton
Report
[Laser cut and engrave] Walnut cross with acrylic
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Walnut cross with acrylic
[Laser cut and engrave] Walnut cross with acrylic

Walnut cross with acrylic

Cross celtic.xcs
Cross celtic
.xcs
Application scenario
Laser (45min)
Machine & module
xTool D1
20W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
90
861

Information

      Downloaded the cross image from the internet. Removed background in XCS and set cut settings and cut out the cross.
Placed the clear acrylic on top of the basswood background and drilled holes in the 4 corners. Glued the cross on the basswood,
and screwed on the standoffs to the basswood, then placed the acrylic over the standoff screws and attached the top screws.
Comments

Remixes

xTool Supplies Used in This Template

xTool D1
xTool D1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood