HomeTemplatesTools & Special MaterialsTest Grid
bewoote
Report
Laser cut and engrave
Project made with xTool F1 machine for Laser cut and engrave.
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Test Card - F1 Power V2_0

Instruction
Test Card (BL) V2_0.xcs
Test Card (BL) V2_0
.xcs
Application scenario
Laser (2min)
Machine & module
xTool F1
10W
Compatibles · 10
Material used
Black Metal Business Card
1354
4840
Information
      This project prints test pattern for F1 on black metal business cards.
The purpose is:
1. a power reference for future comparison
2. select the lowest required power
3. chose power/ speed setting to provide the best dynamic range for grey scale

Verison 2_0 - Useful dynamic range of Blue Light card increased. QR Code for xtool material added. Burn time added.
Instruction
1
Step1

This is a test pattern for F1 printed on the xtool Black Metal Business cards. The Test Pattern can be use for:

  1. a reference for future comparison of Power
  2. choosing minimum required power
  3. choosing power/ speed to provide optimum greyscale

The xtool Black Metal Business Cards are painted. Some residue remains after the burn. Washing the cards post burning is recommended.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1
Black Metal Business Card
Black Metal Business Card

License

CC BY-NC-SA