HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
LaserCutano
Report
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Halloween Coffin with Bat

Instruction
Goffin with Bat.xcs
Goffin with Bat
.xcs
Application scenario
Laser (30min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
160
993
Information
      Enchanted 5-Layer Halloween Coffin

Elevate your Halloween decorations with this hauntingly detailed coffin design! This decoration features five intricate layers, with a large bat at the center. The design is enhanced with additional bats, spider webs, and grave motifs, creating a spooky and atmospheric effect perfect for the season.

Key Features:
5-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Scalable to your desired size.
Perfect for both beginners and experienced makers.

Download this design and start creating your own enchanted Halloween Coffin!
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

 

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview

After cutting you have 5 layers.

You should glue all the layers of this decorative together.

You can paint before gluing.

3
Step3: Done
Preview

Now you can enjoy the terribly beautiful decoration during your Halloween celebration or give it to your friends.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA