![[Laser cut and engrave] Greeting Card Elephant](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/707eea1a-1ff7-4e0c-a5cd-eaf876785b93?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Greeting Card Elephant
Instruction
Information
Prepare a beautiful birthday card for your friend who has a birthday coming up!
Instruction
Step1: Prepare for processing
With the machine switched on, open xTool Creative Space on your computer, drag in the required xcs files, combine the processing modes, confirm the modes and parameters for each layer and prepare for processing.
Step2: Inkjet module
Install the fine cutter head and inkjet module, remove the inkjet cover and place it on the bottom right corner of the base plate. The inkjet module will be processed first.
Step3: Cutter mode
Immediately after that, it will go to the fine cutter mode, and the knife will finish cutting and gently remove the unwanted part of the jammed paper.
Step4: Embossing module
Replace the inkjet module with an embossing module, place a sheet of gold foil on the paper to be embossed with the gold foil, and use patterned paper to pull the gold foil tightly and stick it firmly on all four sides.
Step5: Notes
- After using the inkjet module remember to install the inkjet cover in time to prevent the ink from drying.
- the use of gold foil paper embossing text should be gold foil paper four sides with the beautiful paper tightly pasted firmly.
- If the sticky board is not sticky enough, you can use the beautiful paper to fix the paper on the sticky board to prevent the paper from being scraped up and displaced when the knife cuts.
