![[Laser cut and engrave] Too Hot to Trot](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3cd6d64c-1cf5-42aa-a804-115810c98382?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Too Hot to Trot
Instruction
Information
PSA to remind people that they need to be aware of ground temps while walking their fur babies.
Instruction
Step1: Download and Re-Size
Download the File
Resize the SVG to match your material.
I made my sign 8"x10"
This makes it larger than the work area for the machine.
Step2: Place Acrylic Onto Bed
Using the included placement jig, I placed the sheet onto the be for a repeatable alignment.
Step3: Flip the Image 180
Because of the large size of the sheet vs the size of the machine we have to get a little creative.
Now I want to engrave the top area first.
To do this I'll actually be engraving upside down from the outermost edge into the machine.
Step4: Flip the Image Again!
Now to process the bottom of the sign we must rotate 180 degrees again.
This time we will only be doing the lower section of the SVG
The SVG will need to be rotated to match the acrylic.
Step5: All Done!
Now I will let my community decide where I will donate this sign. It gives the community a chance to interact and get to know you.
The overall Cost to make was $4.35
