Report
![[Laser cut and engrave] Retro Gold Acrylic Cassette Tape Keyring Keychain](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3adf3964-844a-42be-87bd-c4fc492cd3df?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Retro Gold Acrylic Cassette Tape Keyring Keychain
Instructiontape keyring
.xcs
Application scenario
Laser (4min)
Machine & module
xTool F1
Material used
3mm Black Acrylic (for Slide Extension)
192
1392
Information
With this project you will learn how to cut & engrave gold acrylic with your xTool and make a very cute retro keyring keychain.
Instruction
1
Step1: What you will need
For this project you will need gold acrylic 3mm wide or any other acrylic colour you will like to choose as well as a keychain keyring.
2
Step2: Instructions
Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.
Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 2 to four passes.
3
Step3: Enjoy!
Preview
Now that this piece is cut & engraved, you can assemble it and voila! you have a very nice keyring keychain which you can personalise anytime. Maybe add a name or special message?
Comments
