Report
![[Laser cut and engrave] Simple Acrylic Mirror - Shine, it looks good on you!](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ee6435ad-2dce-4abb-af2a-c83ec33a80a9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Simple Acrylic Mirror - Shine, it looks good on you!
Instructionmirror
.xcs
Application scenario
Laser (10min)
Machine & module
xTool P2
55WMaterial used
3mm Mirror Acrylic
3mm Black Acrylic (for Slide Extension)
23
487
Information
Thinking positively can change a lot. So I've created a little reminder for your desk that everything is much better when you're smiling.
Instruction
1
Step1: Download the file
Preview
Download the file. You can also use a new text. However, you must remember that the mirror is engraved from beThe text must be mirror-inverted, as the mirror is engraved from behind. To do this, simply place the mirror acrylic in the laser with the mirror surface facing downwards.hind and therefore you have to mirror the text.
2
Step2: Cut the mirror
Preview
The text must be mirror-inverted, as the mirror is engraved from behind. To do this, simply place the mirror acrylic in the laser with the mirror surface facing downwards.
3
Step3: Cut the black acrylic
Preview
For cutting out the black acrylic (other colors also possible), the holes were drawn with a 0.1 mm kerf. Here you could increase the kerf if necessary.
4
Step4: Put all the parts together and glue them
Preview
Preview
Preview
Preview
Put all the parts together and glue them together with a suitable adhesive.
Comments
