Mini 4 piece organiser
Instruction
This organiser includes 4 50mm cube boxes and a holder to keep them all together in one place. You might find these little boxes useful for small screws, key rings, or any other accessories you might use while making things with your laser.
I engraved a quote on the front of this organiser but you can easily edit the design to add something more personal to your.
You might want to engrave a picture, your logo, or labels for what will be stored in each box.
All parts of this project should be cut from 4mm material.
I used 4mm plain MDF but any wood, plywood or acrylic will work perfectly for this organiser.
The above settings are for use with the xTool D1 Pro 5w laser and will need to be adjusted for other machines.
Assembling this organiser is relatively simple and should only take around 10 minutes.
Start by assembling the 4 small boxes, these should slot together tightly but glue can be added for extra strength if needed.
Once all 4 boxes are complete the large holder should slot together in a similar way. Slot the bottom and ends into one of the long sides then the second long side should slot into place and hold everything together.