Report
![[Laser cut and engrave] Beech Cutting Board](https://image-res.xtool.com/ali-res/community/making/b9169e39-fff4-4f09-89c8-128eb4d1ceea.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Beech Cutting Board
InstructionBeech Cutting Board
.xcs
Application scenario
Laser
Machine & module
xTool D1 Pro
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
298
5442
Information
I engraved Thanksgiving themed images on my cutting board, knives and forks. Awesome!!
Instruction
1
Step1
Preview
Import your design file to XCS, connect the machine with your computer, and then adjust the size of the image according to the size of the cutting board.
Then you can click Process and Frame to confirm the processing area.
2
Step2
Preview
When the process is complete, turn off the machine. And then you can take the piece out of it.
Take a look at this, isn't it great!!
NOTE
To center the image on the cutting board, you can place the laser dot at the center of the board, and then set the starting point of processing on the Preview page.
Comments