HomeTemplatesDecorHome DecorShelves & Holders
gadgetsbeyondthisworld
Report
Laser cut and engrave
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Acrylic Strawberry Tumbler Topper

Instruction
strawberry test.xcs
strawberry test
.xcs
Application scenario
Laser
Machine & module
xTool F1
Material used
3mm Black Acrylic
62
591
Information
      With this acrylic project you will learn how to make acrylic tumbler toppers with your xTool laser machine.
Instruction
1
Step1: What you will need

For this project you will need red acrylic 3mm wide or any other acrylic colour you will like to choose as well as a tumbler.

2
Step2: Instructions

Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.

 

Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 2 to four passes.

3
Step3: Enjoy!
Preview

Now that the pieces are cut you can assemble them and voila! you have a very nice tumbler topper which you can personalise anytime.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1

License

CC BY