Freebies STICKERS
Instruction
In my shops, when a customer buys something, I like to add some extras. I made these freebie stickers, what I can use on small packs or bags. Maybe these can be handy for your small business too. ;)
I do have an M1 machine, and started to make stickers with that. Here I am sharing a tutorial with my findings, set options, and way of doing it.
(probably it would be easier with the M1 Ultra, where you can do everything all-at-once), but these settings might be handy for that machine too.
As I am in Europe, I made a design in A4 format, feel free to adjust it to Letter size. Just set the print & cut settings, and print out the design. Then you can put it into your mat, calibrate it, and start.
(These are standalone stickers as you can see, but made a kiss-cut setting too. I like it in this way, so you can easier peel the standalone stickers, if you are using both)
Let your machine cut the stickers. If it is not aligned perfectly, you can pause it, and move your mat a bit (happened me once); but usually it is perfectly aligned.
Please note that the settings might need to be adjusted for your sticker papers.
If the settings were set right, you should be able to remove the ‘background’, and peel off the offset of the standalone stickers too.
You are done. Feel free to share in comments, of you had to adjust your settings. Also, let me know if you need more tutorials about stickers :)