First, select your vector image. This image will be ENGRAVED.

Second, click on “shapes” on the side bar and select your desired shape for the key ring hole of your tag. Place it in your desired location. This will be CUT. 

Third, you will select “outline” on the top bar and you will make sure the keyring hole is inside the outline. If you cannot get the hole inside the outline, make sure both the vector and hole are highlighted before selecting outline option. Choose your desired width. This will be your CUT.

Fourth, you will create your text using XCS library or your desired text. Make sure this is centered to your liking. This will be SCORED. 

I used 2-toned acrylic. Top layer is chrome and inside is black glitter. You can choose your desired acrylic for this project. 

I also used the slide extension to get clean straight cuts. Flat laser can be used but beware of slanted edges. 

CUTTING: Blue Light - Power: 95% - Speed 10 - Pass 3 or 4

ENGRAVING: Blue Light - 90% Power - Speed 125 - Pass 1

SCORE: IR Light - 100% Power - Speed 90 - Pass 1