Report
![[Laser cut and engrave] Coster with LED light For MOM](https://image-res.xtool.com/ali-res/community/making/de63c895-fb69-4805-8745-910972aafa23.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Coster with LED light For MOM](/_nuxt/video_icon.B5w3Xr8w.png){kind=icon}
Coster with LED light For MOM
InstructionRound-Coaster- with LED
.xcs
Application scenario
Laser (30min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
29
977
Information
I used Walnut Plywood Sheets XTOOL SELECTED for this item.
and LED Coaster for the inside flashlight.
The LED coaster flash had 3 light settings.
The button has at the bottom.
You can get the LED Coaster from temu for 0.9 USD and
at amazon for 1 USD only.
Instruction
1
Step1
Preview
Add the material with a triangular prism.
And add an Image.
Add outline with 0 distance.
2
Step2
Preview
Preview
Preview
Preview
The XCS setting for the walnut sheet is 3 passes.
But I used 1 pass.
The machine can cut all cutting lines very well.
3
Step3
Preview
Preview
Preview
Add circle marking with marker pin
And add cutted pins to the Top plate's inside.
And add stars too.
4
Step4
Preview
Preview
Preview
Add the base plate and assemble to the top plate.
I used gorilla wood glue.
5
Step5
Preview
Preview
Add the led sheet to the middle of the coster's bottom side.
6
Step6
Preview
Preview
add the Self-Adhesive Clear Rubber Feet Tiny Bumper Clear Feet Pads Clear Pads Funitures Clear Rubber Feet to the bottom.
all done.
Press the button to light on.
And push again to speed up for a faster light flash.
And push again to a stable flashlight.
push one more time to off the light.
Good Luck
Comments