The first step was making the flip-flop. For this, I used Xtool AI, then I used the edit node function to remove all the parts that I did not like. Finally, I made an outline of the flip-flops.

Now, I added the text and the font that I wanted. Then, I used the outline around the text and finally combined the outlines. I also added a hole at the top to hang up the sign.

For this, I used basswood, but you can use any material you want.

Now it's laser time! This is a long cut because of all the engraving. If you use a different material or laser power, your time will vary. You will also need to adjust your settings for your laser power and material. Don't forget your laser safety glasses.

Good news, you're done with your sign!