![[Laser cut and engrave] F1 Ultra Coaster Jig](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d5d5a681-af70-49b7-ad6a-2043a7dd5e7e?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
F1 Ultra Coaster Jig
Instruction
Information
This is a coaster jig for the F1 Ultra. I used an S1 to cut the jig, but the F1 Ultra would also work, though it would be much harder.
115/312
Instruction
Step1: Material
For this, you just want to use a scrap piece or a not-so-good-looking piece since the jig will only be used in the laser. If you want, you can use a 6mm piece of basswood and you won't need the feet for the coasters to fit.
Step2: laser Time
It's time to laser. These settings are for an S1 40-watt. If you are using a different laser power or source, like the F1 Ultra, make sure to adjust these settings accordingly. Also, don't forget your laser safety glasses.
Step3: Assembly
You will need to glue the feet to the bottom of the jig unless you used a thicker material. After letting them dry completely, you should be ready to go.
Step4: Alignment
To align this jig, I used a new method involving the measuring dot to find the center of the F1 Ultra. Once you've done that, you should be ready to go.
Step5: You're Done
Good news, you're done with your jig! Don't forget your laser safety glasses when using it. If you have any questions, please leave a comment.
