HomeTemplatesTools & Special MaterialsTest Grid
Drew's Den
Report
[Laser cut and engrave] F1 Ultra Cutting Test
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Project made with xTool F1 Ultra machine for Laser cut and engrave.
[Laser cut and engrave] F1 Ultra Cutting Test
[Laser cut and engrave] F1 Ultra Cutting Test
[Laser cut and engrave] F1 Ultra Cutting Test
[Laser cut and engrave] F1 Ultra Cutting Test

F1 Ultra Cutting Test

Instruction
cut test.xcs
cut test
.xcs
Application scenario
Laser (5min)
Machine & module
xTool F1 Ultra
20W
Compatibles · 11
Material used
1/125"(0.2mm) Black Metal Business Card
431
3399

Information

      I have had some trouble finding the best settings for cutting aluminum business cards, so I made this test file to help choose the best option for cutting.
114/312

Instruction

1

Step1: Design

F1 Ultra Cutting Test instruction: step 1 - Design
Preview
F1 Ultra Cutting Test instruction: step 1 - Design
Preview

One of the variables you can change to get different outputs is the number of passes you use. If you lower it, you might be able to save some time by using a higher power setting.

2

Step2: Material

F1 Ultra Cutting Test instruction: step 2 - Material
Preview

For this, you want to use a metal business card. Any color should do.

3

Step3: laser Time

F1 Ultra Cutting Test instruction: step 3 - laser Time
Preview

Now it's time to laser your card. I won't be listing the settings, as that would take up the whole page. Just make sure you have it set to fiber. Also, don't forget your laser safety glasses.

4

Step4: You're Done

F1 Ultra Cutting Test instruction: step 4 - You're Done
Preview

Good news! You're done with your laser card. Good job!

Comments

Remixes

xTool Supplies Used in This Template

xTool F1 Ultra
xTool F1 Ultra
1/125"(0.2mm) Black Metal Business Card
1/125"(0.2mm) Black Metal Business Card

License

CC BY-NC-SA