HomeTemplatesOffice & StationeryDesk Organization
MM
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Engraved USB stick organiser

Instruction
USB storage.xcs
USB storage
.xcs
Application scenario
Laser
Machine & module
xTool D1 Pro
5W
Material used
4mm MDF
3mm Basswood Plywood
106
930
Information
      This handy little desk organiser holds 5 USB sticks and is an easy way to always know where your USB drives are.
Instruction
1
Step1: Materials
Preview

I used 4mm MDF for the bottom 3 layers and 3mm plywood for the top layer. This gave the perfect depth to securely hold the USB. 

2
Step2: Design
Preview

I engraved the USB symbol on the top layer but you can easily change this to something more personal like a name or logo. 

3
Step3: Cutting and engraving
Preview

There are the settings I used with the xTool D1 Pro 5w and they will need to be adjusted for other lasers.

4
Step4: Assembly
Preview
Preview
Preview

You will need to apply wood glue to each layer as you align them on top of one another, be extra careful not to get glue in the USB slots. If you have a clamp available, use this to securely hold the layers together while the glue sets.

If any glue does seep into the slots when using the clamp be sure to remove as much as possible before it has time to harden. 

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA