Switch on the machine, open xTool Creative Space on your computer, drag in the desired xcs file and lay the cardstock flat on the backing.

The material is ready, adjust the parameters of the file, calibrate the processing range, select the combined processing mode, confirm and adjust the parameters, and install the inkjet module first to prepare for the work，remember to remove the cover at the bottom of the inkjet and place it in the lower right corner of the machine, after finishing the inkjet process the module will automatically attach the cover along the path.

Operate the fine cutter function, confirm the parameters, and perform paper cutting.

Next, install the brush tool and insert the official brush into the follower on the left side after securing it to the brush holder.

Paste the gold foil paper, use the beautiful paper to fix and pull the four edges of the gold foil paper tightly, after processing, remove the gold aluminium foil transfer paper can be.(also need to emboss the crease where the paper was folded，Folds easily after imprinting)

Complete works

1. remember to close the cover after using the inkjet module to prevent the ink from drying out.

2. Don't move the base plate as well as the cardboard in case of processing misalignment.

3. The gold foil should be fixed and pulled tightly on all sides.