Report
![[Laser cut and engrave] Rock it with XTool](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/7cdeb472-5c28-4736-826e-032c8a23ee37?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Rock it with XTool
Instructionrockit
.xcs
Application scenario
Laser (15min)
Machine & module
xTool S1
20WCompatibles · 9
Material used
Pine Wood
6mm Pine Plywood
14
283
Information
A few rocks and an XTool.
Instruction
1
Step1: Set the shape and thickness of your rock.
The main thing to remember is to take it slow and use multiple passes if needed.
2
Step2
Put painters tape around the rock. It helps stop chipping and helps protect your machine. It is better to lower your settings and do multiple passes if needed.
3
Step3
Once you have the desired effect remove rock and tape. Simple as that.
Comments
