Report
![[Laser cut and engrave] Cut & engrave mockup key](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1b18d0f3-b366-498a-86b5-5818ab0869f1?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Cut & engrave mockup key
InstructionD1 Pro Congratulation keys
.xcs
Application scenario
Laser (18min)
Machine & module
xTool D1 Pro
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
1/8"(3mm) Birch Plywood
3mm Basswood Plywood
65
858
Information
Did this mockup key realtor need to customise Home sweet home. Was done on D1 pro. If you are having a M1 or S1 you can use the file but just need to do the power and engrave setting manually.
Instruction
1
Step1: Open file and resize the file
Preview
Preview
Preview
A total of 3 process in this file red layer is to cut, Black layer to score, Green and blue layer to engrave. Make sure to use 415x220mm 3mm plywood. Set the air-ssist on and on top of the honeycomb for better cutting.
2
Step2: The whole process will take 18 minutes
Preview
Preview
Preview
4 More images
If you want to add personalise name you could remove the original text to add on.
3
Step3: Complete
Preview
The final look. Hope you enjoyed it.
Comments
