Report
![[Laser cut and engrave] 3D Christmas Village](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/bfda37b4-e0bf-44e2-b174-a350cd2feac6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
3D Christmas Village
Instruction3D Christmas Village
.xcs
Application scenario
Laser (60min)
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
186
1750
Information
Christmas scene as I had been inspired by other designers. My sister is Christmas mad so I made it for her. I hope you like it.
Instruction
1
Step1
- The are two canvases in this design. Very simple to assemble. How I did it was as follows:
- I made the base plate first, which painted before assembling
- Whilst the base was drying I assembled the oval frame. Note there are 4 x 95mm pieces that are glued to the inner faces of the frame. These are for the base plat to sit on.
- Once everything was dry I simply added the copper wire led lights.
- I have left room inside to fit a musical box mechanism that plays silent night. I have not figured how I will attach it yet.
- I forgot to put the Lamp Post on this one
Please feel free to adapt as you see fit.
Comments
