scrapbookmemories
Report

Laser cut Jewerly box 4"x4" with lid 3mm ply

Instruction
D1 20w Jewerly box with lid(DesignFind) xcs.xcs
D1 20w Jewerly box with lid(DesignFind) xcs
.xcs
Application scenario
Laser (60min)
Machine & module
xTool D1 Pro
20W
Compatibles · 8
Material used
3mm Basswood Plywood
3mm Birch Plywood
1083
5749
Information
      The size of the jewerly box is 4"x4" or 100x100mm. A great gift that i have made during Mother's Day. 3mm ply was used and a 20w module.
    
Instruction
1
Step1: For D1 / D1 Pro 20w
Preview
Preview

Take Note. There are 2 layers on this file Black is to cut and Red layer is for score. Prepare a piece of 3mm ply measures 340x230mm for this project. The settings was used on the 3mm ply, 

2
Step2: For M1
Preview
Preview

For M1 10w prepare a piece of 310x230mm 3mm plywood. For cutting on M1 do use the air-assist and place the plywood on top of the honeycomb. Take note there are 2 layers/ process black layer for cut and red layer for score.

3
Step3: Assemble and paint overlay piece.
Preview
Preview
Preview
3 More images

On the 4"x4" square paint it black (spray paint or brush with acrylic black). 

You can use wood glue to piece togather all the pieces and assemble.

 

4
Step4: How it looks like after assemble.
Preview
Preview
Preview

Easy assemble let adhesive dry for 24 hours before put the top cover over the base.

5
Step5: For additional add-on
Preview
Preview
Preview

I have used a earlier project for Mother's Day cut outs. You can download the project here: https://www.designfind.com/howtos/13421

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood
3mm Birch Plywood
3mm Birch Plywood