Report
![[Laser cut and engrave] Camping at the Beach Charm](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a213c579-6672-4528-8674-158960a70ae5?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Camping at the Beach Charm
InstructionCamping Beach Charm
.xcs
Application scenario
Laser (35min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
40
748
Information
Great project for kids and adult who like to color. Cut and engrave this charm then color with pencils.
Instruction
1
Step1: Open File Creative Space Software
Preview
Open the file in Creative Space Software. Red will be cut and Purple with be engrave.
If you want to change the text, this would be the time to do it.
2
Step2: Prepare for Laser Cutting
Preview
Secure the wood to the honeycomb and place the file over the area you want to cut. Set the parameters for the project, as listed, then send to the laser for cutting.
3
Step3: Color and Glue the Project
Preview
Using coloring pencils color the design. Once done glue the 2 pieces together using wood glue.
Note: if you want to seal the project do this before gluing the pieces together.
4
Step4: Finishing Touches
Preview
Use wood beads and string to finish of the charm.
Comments
