HomeTemplatesDecorHome DecorDoor Sign
Drew's Den
Report
[Laser cut and engrave] Thermostat sign
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Thermostat sign
[Laser cut and engrave] Thermostat sign
[Laser cut and engrave] Thermostat sign
[Laser cut and engrave] Thermostat sign

Thermostat sign

Instruction
thermostat.xcs
thermostat
.xcs
Application scenario
Laser (10min)
Machine & module
xTool S1
40W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
25
235

Information

      This is a funny sign that I made for our thermostat.
107/312

Instruction

1

Step1: Design 1

Thermostat sign instruction: step 1 - Design 1
Preview
Thermostat sign instruction: step 1 - Design 1
Preview

The first step was inserting an xTool premade frame. Then, you'll need to make an outline of the shape and set the outline to cut.

 

2

Step2: Design 2

Thermostat sign instruction: step 2 - Design 2
Preview

Now you need to add your text. For this, I did a "Do Not Touch" sign for the thermostat, but you can take it and customize it to your liking.

3

Step3: Material

Thermostat sign instruction: step 3 - Material
Preview

For this, I used basswood, but you can choose any material. Just make sure to change your settings.

4

Step4: laser Time

Thermostat sign instruction: step 4 - laser Time
Preview

Now it’s time to laser your piece of basswood. Just make sure that you change the settings for your machine. This is an S1 40-watt. Change your material settings, and then you should be ready to go. Just don’t forget your laser safety glasses.

5

Step5: You're Done

Thermostat sign instruction: step 5 - You're Done
Preview

Good news: you're done. Now no one will touch your thermostat.

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-NC-SA