HomeTemplatesDecorHome DecorWall Art
Herb THE berT
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Surfboard

Instruction
surfboard.xcs
surfboard
.xcs
Application scenario
Laser (60min)
Machine & module
xTool M1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
98
837
Information
      i've seen a surfboard like this on the internet several times and thought i'd give it a try :)
this time in affinity
Instruction
1
Step1: Swirls
Preview
Preview
Preview

we create a swirls with the finished tool
I have taken a very thick contour 
we then adjust that

set the windings 
the different thicknesses are obtained with the width tool
the inner anchor point is very narrow and the outer anchor point is so wide that the edges do not overlap

2
Step2: board
Preview
Preview
Preview
Preview

the board is created from a rectangle
here i have added the anchor points in the center 
top and bottom
then I just moved the existing ones
it is a multiple adjustment of the anchor points and curves

3
Step3: put together
Preview
Preview

Here you can get creative
customize the swirls 
mirror and resize
I have created an extra contour for some of them
and subtracted this contour from the border 

4
Step4: paint & glue
Preview

paint the backside
glue both sides together

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA