HomeTemplatesDecorHome DecorDesk Decor
need.it
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Children’s Dragon-Themed Chalkboard Project

Instruction
Dragon Draw Board.xcs
Dragon Draw Board
.xcs
Application scenario
Laser (30min)
Machine & module
xTool S1
40W
Material used
Black Chalk Board
17
462
Information
      This project involves creating a children’s chalkboard with a dragon theme. The chalkboard, measuring 19” by 11.5”, was purchased from a dollar store. The dragon graphic was uniquely designed using an AI text-to-image generator.
Instruction
1
Step1: Preparing the Chalkboard
Preview
Preview
Preview
  1. Select a chalkboard as your main material. A chalkboard measuring 19” by 11.5” is ideal.
  2. Apply a masking layer that covers the entire board. Ensure the masking layer fits tightly to prevent paint from leaking underneath during the painting process.
2
Step2: Setting Up the Laser for Engraving
Preview
  1. Load the chalkboard into your laser engraver.
  2. Set the focus and marking area appropriately.
  3. Load the file containing the dragon graphic and text.
  4. Align the dragon graphic and text as desired on the chalkboard.
  5. Check the laser settings to ensure the laser will completely cut through the masking paper. It’s acceptable if the laser cuts slightly into the board.
  6. Run the file. This process should take between 12-15 minutes.
  7. Before removing the board, inspect to ensure all lines are completely cut through the masking paper. If any areas are not fully cut, run the laser cut again.
3
Step3: Applying the White Paint
Preview
Preview
Preview
  1. Remove the chalkboard from the laser engraver.
  2. Carefully remove only the sections of the masking where you want to apply white paint.
  3. Use a roller to press the remaining masking tightly onto the board to ensure a snug fit.
  4. Apply a few light coats of white spray paint to the exposed areas. Avoid applying too much paint to prevent it from running under the masking, which could affect the final look.
4
Step4: Final Inspection and Completion
Preview
Preview
  1. If you have carefully followed the previous steps, there should be no need for cleanup.
  2. However, if any areas of the masking paper were not fully adhered to the board, you may need to remove excess paint.
  3. Once everything is set, your children’s dragon-themed chalkboard is ready to be enjoyed!
Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC BY