HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
scrapbookmemories
Report
Laser cut and engrave
Project made with xTool M1 machine for Winter.
Project made with xTool M1 machine for Winter.
Laser cut and engrave
Project made with xTool M1 machine for Winter.
Laser cut and engrave
Project made with xTool M1 machine for Winter.
Laser cut and engrave
Project made with xTool M1 machine for Winter.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Christmas Tree hanging Ornament

Instruction
3D Hanging Christmas Tree Ornament.xcs
3D Hanging Christmas Tree Ornament
.xcs
Application scenario
Laser (90min)
Machine & module
xTool M1
10W
Compatibles · 8
Material used
3mm Birch Plywood
275
2110
Information
      A 3 layered cutting and overlay to build a 3D Christmas Ornament to be hung on the tree.
Instruction
1
Step1: 3 Parts
Preview
Preview
Preview

You can use scraps of 80x100mm 3pcs or 240x100mm a single piece of plywood.

2
Step2: Hit Frame
Preview

Make sure the laser module framing is within the piece of plywood placed inside M1.

Hit Process after framing.

3
Step3: Apply acrylic paint on the cut outs.
Preview
Preview

I am using Americana Acrylics to paint on, you may referred in the image.

4
Step4: Apply glue around the sides
Preview

Finally use your favourite glue to glue all the pieces together and hang on your Christmas tree.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Birch Plywood
3mm Birch Plywood

License

Standard License