HomeTemplatesDecorHome DecorShelves & Holders
scrapbookmemories
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

How to cut 3mm Birch Ply Voronoi Coaster Holder

Instruction
Voronoi Coaster holder.xcs
Voronoi Coaster holder
.xcs
Application scenario
Laser (60min)
Machine & module
xTool D1 Pro
10W
Compatibles · 8
Material used
3mm Basswood Plywood
3mm Birch Plywood
191
1007
Information
      The coaster holder might fit all the circle and square slate coaster which approx.100mm. Easy to assemble all the joins.
Instruction
1
Step1: Prep

Place an 3mm plywood on the honeycomb M1, D1, D1 Pro or S1. 

For M1 10w the parameters 60% 6mm/s 1 pass. As the file was made using D1 Pro 10w.

For 20w module 60% 18mm/s 2pass. Please ensure to turn on the air assist while cutting.

2
Step2: Assemble

All the cutting are finger joins easy fit on slots. Adhesive may be use if you find it loose.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood
3mm Birch Plywood
3mm Birch Plywood

License

CC BY-NC