![[Laser cut and engrave] Summer paddle](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/83c33608-9a86-4977-9db7-a59283781d9d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Summer paddle
Instruction
Information
summer is here
today we had 35 degrees
and I thought something summery was needed :)
i used acyrl colors for painting
but I thinned them with water so they don't cover
Instruction
Step1: create the paddle
only with simple shapes :)
create the main rectangle
create two circles and place them next to each other at the same height
pay attention to the distance between them
create two rectangles with the same distance as the circles
then again 2 rectangles rotated by 20 degrees
here i copied one rotated and mirrored it
last but not least, select everything and choose subtract
Step2: lines
I drew a thin rectangle from top to bottom - only 1mm thick
that can protrude
copied it twice and moved it to the left and right
then I selected everything and subtracted it from the background
so that only what is on the paddle remains
last but not least, i took a palm tree from xcs and aligned it
Step3: signs
simply create a rectangle that extends beyond the paddle
i made the tip with edit node
fill the signs as you like with symbols text etc.
Step4: assembling
i used acyrl colors for painting
but I diluted them with water so they don't cover
i glued the ends of the cords to the back with glue
