Report
![[Laser cut and engrave] Free standing 2 point level](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c2325cd2-5a3e-4211-b556-b98586dac3a2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Free standing 2 point level
Remix
Instruction2 point level remix
.xcs
Application scenario
Laser
Machine & module
xTool S1
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
102
1207
Information
I used the tumbler level created by bahenry1999 to make a free standing level so it is handsfree
This remix is based on
Tumbler Level
bahenry1999Instruction
1
Step1: Cut materials
Preview
Cut the wood using settings for your machine.
2
Step2: Glue spacers
Preview
Preview
Add a little wood glue to the spacers and fit into the frame. Flip the frame over to ensure spacers are evenly placed through the slots.
Comments
