Drew's Den
Report

How to Batch Process

Instruction
batch engraving.xcs
batch engraving
.xcs
Application scenario
Laser (20min)
Machine & module
xTool F1 Ultra
20W
Material used
Wooden Keychain
35
502
Information
      I just got my conveyor belt and want to give it a try, and also share how you can do it yourself.
93/312
    
Instruction
1
Step1: Design 1
Preview
Preview

The first thing that you need to do is switch it to batch engrave mode. Then, take your design and combine it into one piece. For me, this is a set of fish. Next, you will need to make an outline of your material by clicking the green button.

2
Step2: Design 2
Preview

Now, in the frame outline mode, make sure that your material is completely set, then click the save button. Next, you need to start the laser by initiating it like any other process.

3
Step3: Material
Preview

For this, I used these rectangle keychains that I have a bunch of, but the nice thing is that you can use any material that you want.

4
Step4: laser Time
Preview

Now it's time to laser. THIS IS IMPORTANT: you NEED laser safety glasses for this. You want to shut the enclosure as much as you can, but also leave enough room for your keychains to fit. Make sure that you FOLLOW THE SAFETY GUIDELINES.

5
Step5: You're Done
Preview

You're done with your engraving. Good job.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1 Ultra
xTool F1 Ultra