HomeTemplatesDecorHome DecorShelves & Holders
BarkBeetleMichael
Report
[Laser cut and engrave] Highland Cow Coasters
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Highland Cow Coasters
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Highland Cow Coasters
[Laser cut and engrave] Highland Cow Coasters
[Laser cut and engrave] Highland Cow Coasters
[Laser cut and engrave] Highland Cow Coasters
[Laser cut and engrave] Highland Cow Coasters

Highland Cow Coasters

Instruction
Highland Cow.xcs
Highland Cow
.xcs
Application scenario
Laser (45min)
Machine & module
xTool S1
40W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
440
1448

Information

      Designed a simple scene with a Highland Cow in a meadow. Made them into coasters.

Instruction

1

Step1: Set Your Size

Highland Cow Coasters instruction: step 1 - Set Your Size
Preview

Set the file to your desired size and verify the settings match your material. 

2

Step2: Load Material And Process

Highland Cow Coasters instruction: step 2 - Load Material And Process
Preview

Simply load in a sheet of material and clamp it down. 

3

Step3: Work on some Designs While you wait for processing

Highland Cow Coasters instruction: step 3 - Work on some Designs While you wait for processing
Preview

Taking a little time in Adobe Illustrator I Popped this out and did a quick crop to show some of the progress. 

4

Step4: All Finished

Highland Cow Coasters instruction: step 4 - All Finished
Preview

Once the Cut is finished, you can use them as they are or add a few finishing touches. 

I'm going to seal these off camera, and add a cork bottom. 

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY