HomeTemplatesTools & Special MaterialsJigs
MM
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Toothpaste tube squeeze

Instruction
Toothpaste squeezer.xcs
Toothpaste squeezer
.xcs
Application scenario
Laser (5min)
Machine & module
xTool D1 Pro
5W
Compatibles · 8
Material used
3mm Orange Acrylic
52
473
Information
      This handy tool can be used for any tube by easily adjusting the size and can be cut in just a few minutes.
Instruction
1
Step1: Measure
Preview

First you will need the tube you intend to use most often as the size of the slot may need to be adjusted.

If you have a measuring calliper available use this to get a precise measurement of the end of the tube, then adjust the size of the rectangular slot in the design file.

 

 

2
Step2: Material
Preview

I used acrylic for this project as it is durable and waterproof but any other materials will also work fine.

3
Step3: Cut
Preview

The above settings are for cutting 3mm orange acrylic using the xTool D1 Pro 5w laser.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Orange Acrylic
3mm Orange Acrylic

License

CC BY-NC-SA