Report
![[Laser cut and engrave] New Home Gift Magnet](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b96544b7-2ff7-4c24-8db0-d15ed1a770a6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
New Home Gift Magnet
Instructionnewhomemagnet
.xcs
Application scenario
Laser (30min)
Machine & module
xTool M1
10WCompatibles · 9
Material used
3mm Basswood Plywood
3mm Birch Plywood
332
1439
Information
Did you get invited to a house warming and need a quick present? Here's a quick magnet you can customize and give to the new homeowners. Or you can even add a hole at the top and gift as a christmas ornament.
Instruction
1
Step1: The Design
Preview
Preview
Preview
- Start off by creating your house
- Insert a rectangle and a triangle
- align the triangle on top and center to the rectangle
- Select both times and “unite”
- add another smaller rectangle with curved corners and place on the top right as the chimney
- once you have it where you like “ select both objects and ”unite"
- Create outline of the house
- Copy the house with the outline and paste
- Delete the inner houses on the copy
- Add your text to the largest house outline and make sure it's all set to engrave
2
Step2: Laser
Preview
automeasure!
3
Step3: Polishing it up & Assembly
Preview
Preview
Preview
- Glue the outline to the house making sure its flush with all the sides
- Give it a light sanding to make sure its all smooth
- I use a paint brush to dust off any wood particles left behind.
- Add your magnet to the back
Comments
