Report
![[Laser cut and engrave] Hexagon Open Top Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/fda4c072-0f1c-4fc8-addd-1683f62d11e3?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Hexagon Open Top Box
InstructionHexagon Open Top Box
.xcs
Application scenario
Laser (10min)
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
476
2868
Information
Quick and fun project you can use for many purposes. Kitchen utensil holder, pencil/ pen holder. I put some latex gloves in one.
Instruction
1
Step1: Open and Cut file
Preview
Open the file in xcs and cut out of 3mm plywood. Tabs are not sized for any other material.
2
Step2: Assemble
Preview
Assemble your pieces with your desired method. For this I opted for super glue.
3
Step3: Paint
Preview
If you wish to you can paint your material before lasering the project. Here I painted the board with a Acrylic Spray Paint prior to cutting in the laser.
Comments
