Report
![[Laser cut and engrave] Cute Boat - inspired by a Benchy](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/68bc9381-a817-49b5-993c-222eade28f50?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Cute Boat - inspired by a Benchy
InstructionBoat
.xcs
Application scenario
Laser (20min)
Machine & module
xTool P2
55WMaterial used
3mm basswood
565
4664
Information
I took it upon myself to construct a cute boat that.
Instruction
1
Step1: Laser cutting of the parts
Preview
Take the file from the xTool page and load it into the program. Place the parts so that they are cut from a 3 mm thick piece of wood.
2
Step2: Glue the first parts together
Preview
Glue the first parts together. I recommend starting with the base, one side panel and the back panel.
3
Step3: Glue on the top edge
Preview
Put more parts together. I recommend preparing the second side panel and the front parts.
Then apply glue to the top edge of all parts.
4
Step4: Top part and cabin
Preview
Add the top and also assemble the parts for the cabin.
5
Step5: All Parts together
Preview
Join all the parts together with glue.
Comments
