![[Laser cut and engrave] Cord Labels](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8af2baff-40d9-4ef0-a001-6bd48022d6f6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Cord Labels
Instruction
Information
This is a custom cord label that you can use to mark important cords.
85/312
Instruction
Step1: Design 1
The first step was making a small circle with a smaller one in the middle, then subtracting them to make a circle with a hole. Then, I added a pill shape on top of the circles and combined the two.
Step2: Design 2
Now I used the Edit Node function to make the whole shape smoother by removing the top two. Next, I added a line on the bottom; this will be set to cut so you can actually insert the cord. Then, I added text of what item I'm going to be labeling. This one says "phone," but you can change it to what you need, such as a person's name or another item.
Step3: Material
For this, I used a metal business card from xTool. Just remember to wear your laser safety glasses.
Step4: Laser time
Now it's time to laser your cord labels. Just make sure that your settings are correct.
Step5: You're Done
You're done with your Cord Labels. Good job!
