HomeTemplatesDecorHome DecorWall Art
gl
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Giant mandala

Instruction
Slide1.xcs
Slide1
.xcs
Application scenario
Laser (150min)
Machine & module
xTool S1
40W
Compatibles · 8
Material used
3mm Maple Plywood
256
1394
Instruction
1
Step1: Cut slides
Preview

Cut slides 1, 2 and 3 twice and slide 4 once

2
Step2: Glue the slide 2
Preview
Preview
  1. Apply glue to a piece of slide 2 and affix to the 2 parts of slide 1, making sure that the cut line of slide 2 is perpendicular to the cut line of slide 1.
  2. repeat the operation with the second part of slide 2
3
Step3: Glue the slide 3
  1. Apply glue to a piece of slide 3 and affix to the 2 parts of slide 2, make sure that the cutting line of slide 3 is different than the cutting line of slide 1 and 2
  2. repeat the operation with the second part of slide 2
4
Step4: Glue the slide 4

Apply glue to slide 4 and apply to the center of slide 2

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Maple Plywood
3mm Maple Plywood

License

CC BY-NC