HomeTemplatesTools & Special MaterialsGadgets
MM
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Cable organising clips

Instruction
Cableorganiserclips.xcs
Cableorganiserclips
.xcs
Application scenario
Laser processing (4min)
Machine & module
xTool D1 Pro
5W
Compatibles · 10
Material used
3mm Black Opaque Glossy Acrylic
14
488
Information
      Everyone has so many chargers for devices such as phones, iPads and laptops and the wires will inevitably get tangled when they are not in use. These simple little clips can help you keep your cables organised and tangle-free.
Instruction
1
Step1: Measure your cables
Preview

This design file includes two versions for cables of different thicknesses. The included sizes are perfect for iPhone and MacBook charging cables. 

 

If you have a digital measuring calliper available, use this to accurately measure your cables and adjust the design accordingly.

2
Step2: Material
Preview

I used 3mm black acrylic to make these clips but any material will work just fine. Due to the small size thin or soft materials will likely break will repeated use so I would recommend 3mm or thicker.

3
Step3: Cut
Preview

The above settings were used to cut 3mm black acrylic using the xTool D1 Pro 5w laser and will need to be adjusted for other machines or materials.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Black Opaque Glossy Acrylic
3mm Black Opaque Glossy Acrylic

License

CC BY-NC-SA